Beijing Centrality Communication PA168S User Manual download pdf (Page 5)

Centrality PA168X IP Phone LAN Configuration Guide

Beijing Centrality Communications Co., Ltd.

● If your IP phone has no LCD, please do as follows:

1) Press or pick up the handset, and then input the

password of the phone. When No 18 light begins blinking once a

second, please go to the next step.

Note Press Speaker key or pick up the handset, and then input the password of

the phone. Verify that No 18 light blinks once a second. It indicates that the

phone is under setting mode

The default password of Centrality PA168X IP phone is 1234.

2) Press and , then the phone will restart. Verify

that No.18, 19 and 20 lights are on together, and then No.18 light

is off; No.19 light blinks or is off ; No. 20 light blinks or is on. As

soon as the phone restarts successfully, you can change the IP

address of the phone.

3) Repeat step 1) to make phone enter setting mode again.

4) Set the IP address of the phone manually: According to the IP

address of the PC, designate an IP address on the same segment

to the phone. For example, the address of PC is 192.168.1.10;

please designate 192.168.1.100 as IP address of the phone by

pressing 192*168*1*100 keys on the keypad orderly, and then

pressing .

Local IP

Speaker

1 2 3 4 5 6 7 8 9 10 ... 22 23

No comments

Beijing Centrality Communication PA168S User Manual Page 5